Product Details

Tripp Lite by Eaton Gigabit Ethernet PoE/PoE+ Extender Water Resistant - Cat5e/6/6a IP65 IEEE 802.3at/af 30W 1 Port

2 x Network (RJ-45) - 328.08 ft Extended Range - Aluminum - Silver

Product ID

Mfg. Part: NPOE-EXT-1G30WP
UNSPSC: 43201553
MNJPartNumber: MNJ14106619

Availability

800-870-4340   Contact your MNJ Sales Representative for the latest availability

Product Pricing

$148.39

Qty:

Options & Accessories

Tripp Lite by Eaton Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M) PoE Black 6 ft. (1.83 m)

6 ft Category 6 Network Cable for Network Device, ATM - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - 1 Gbit/s - Patch Cable - Gold Plated Contact - CM - 24 AWG - Black - 1
Mfg. Part: N201-006-BK

$7.95

Tripp Lite by Eaton Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af 30W 1 Port

120 V AC, 230 V AC Input - Ethernet Input Port(s) - Ethernet Output Port(s) - Surface-mountable - Black
Mfg. Part: NPOE-30W-1G

$46.58

Tripp Lite by Eaton Cat6a 10G Snagless UTP Ethernet Cable (RJ45 M/M) Black 5 ft. (1.52 m)

5 ft Category 6a Network Cable for Network Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - 10 Gbit/s - Patch Cable - Copper Plated Connector - 24 AWG - Black
Mfg. Part: N261-005-BK

$12.12

Tripp Lite by Eaton Cat6a 10G Snagless Shielded STP Ethernet Cable (RJ45 M/M) PoE Black 5 ft. (1.52 m)

Category 6a for Network Device, Switch, Modem, Router, Hub, Patch Panel, VoIP Device, Camera - 1.25 GB/s - Patch Cable - 5 ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Shielding - Black
Mfg. Part: N262-005-BK

$17.55

Tripp Lite by Eaton Cat6 Gigabit Molded (UTP) Ethernet Cable (RJ45 M/M) PoE Black 6 ft. (1.83 m)

Category 6 for Network Device, Router, Modem, Blu-ray Player, Printer, Computer - 128 MB/s - Patch Cable - 6 ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Gold-plated Contacts - Black
Mfg. Part: N200-006-BK

$15.75

Main Features

Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 500 Meters
This single-port connector allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and a remote PoE device an extra 328 feet (100 meters). In addition, by cascading as many as four NPOE-EXT-1G30 extenders, you can extend that connection as far as 1640 feet (500 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328 feet each.

Saves You Time and Money on Unnecessary Equipment Updates
The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices
Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE device against short circuits and overloads.

IP65 Rating Denotes Resistance to Dust and Water
The IP65 rating means the aluminum housing is not only 100% protected against dust, but also able to endure water spray, such as from a nozzle, from all directions. This makes the NPOE-EXT-1G30WP ideally suited to outdoor use.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOE-EXT-1G30WP to your LAN. Just connect your switch or network jack and your PoE/PoE+ device to the shielded RJ45 Power + Data ports using existing Cat5e/6/6a cable. LEDs indicate the unit is receiving power and is ready to transmit data.

Designed for Installation Almost Anywhere
Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The silver aluminum housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

Recent Technical Specifications